Control your yacht’s key systems with one app.
SELECTED USE CASE:Smart Generator Autostart
Automatically start and stop supported marine generators using live battery data from Victron Cerbo GX or Smarter.Yachts Dash.
- Supports Cummins Onan, Fisher Panda, Mase and GENSET generators
- Live battery State of Charge and voltage from Victron Cerbo GX
- Can also use battery data from the NMEA 2000 network through Smarter.Yachts Dash — no Cerbo GX required
- Automatic generator start based on configurable SoC or battery voltage thresholds
- Automatic stop when the configured charging target is reached
- Optional additional runtime after reaching 100% SoC for absorption / float charging
- Generator maintenance logbook with operating hours, oil checks and service intervals
Turn your existing marine generator into an intelligent part of the yacht's energy system.
On many yachts, the generator is still operated as a standalone system. The crew monitors the batteries, decides when charging is required, starts the generator manually, and later has to remember to stop it again.
Smarter.Yachts connects to the start and stop controls of supported marine generators, including Cummins Onan, Fisher Panda, Mase and GENSET. Live battery information can be supplied either by an existing Victron Cerbo GX or by Smarter.Yachts Dash using data available on the yacht's NMEA 2000 network.
With Smarter.Yachts Dash, Generator Autostart can therefore operate without a Victron Cerbo GX, provided the required battery State of Charge and/or voltage data is available on NMEA 2000.
Generator Autostart can react automatically to the condition of the battery bank. Configurable thresholds define when the generator should start — for example when State of Charge falls below a selected level or when battery voltage drops below the configured limit — and when it should stop again after the batteries have recovered.
For charging strategies that require more than simply reaching 100% State of Charge, the generator can continue running for a configurable period after 100% is reached. This provides additional time for absorption or float charging before the generator is stopped automatically.
The integrated maintenance logbook keeps generator service and oil-check records together with operating-hour tracking and configurable maintenance intervals.
Optional sensors connected through Victron Cerbo GX provide temperature monitoring. Dive Compressor mode can also display relative humidity when available. Sensor values expire when no fresh reading is received; monitoring does not replace equipment protections.
Questions about this application?
Find out how Smarter.Yachts Node V2 could work with your existing equipment. Our AI Assistant can help you identify relevant requirements and what needs to be verified.
“Smarter.Yachts brings generator control and live battery data together. Whether the data comes from Cerbo GX or through Dash from NMEA 2000, the charging cycle can be handled automatically.”
Try the simulator — no hardware or account required.
Internet required. Limited functionality; some screens are static mockups. The simulator demonstrates the underlying control function, not every installation detail.Interested in this solution?
Let us discuss how this use case can be integrated into your existing onboard installation.